Assessment of Occupational Accidents in the Malaysian Construction Industry from 2015 to 2023: A Study on ISO 45001 Implementation, Impact on Workers, and Safety Recommendations
DOI:
https://doi.org/10.11113/ijbes.v12.n1.1405Keywords:
Accidents, Occupational Safety, Construction Workers, Regulatory.Abstract
This research embarks on a comprehensive investigation into the landscape of occupational accidents within the Malaysian construction industry spanning the period from 2015 to 2023, addressing a crucial knowledge gap concerning the prevalence, trends, and implications of workplace safety incidents. Despite the construction sector's pivotal role in driving economic development, its persistent high incidence of occupational accidents presents a pressing need for proactive measures to safeguard workers' well-being and ensure sustainable growth. Leveraging quantitative data obtained from the Department of Occupational Safety and Health (DOSH), this study conducts a meticulous analysis of accident frequency, severity, and distribution across various states and years, unveiling significant regional disparities and shedding light on key contributing factors to accident occurrence. The study incorporates an analysis of ISO 45001 implementation status within construction companies, revealing stark differences in accident rates between certified and non-certified entities. Certified companies consistently demonstrate lower accident rates, suggesting a potential correlation between ISO 45001 compliance and improved safety performance. These findings underscore the significance of ISO 45001 certification in promoting safer work environments and reducing the incidence of occupational accidents within the Malaysian construction industry. The findings highlight the urgent imperative for collaborative action among stakeholders to fortify safety regulations, enhance enforcement mechanisms, and instill a robust culture of safety within the construction industry. By examining the efficacy of legislative frameworks, regulatory enforcement, and industry practices, the research underscores the critical importance of concerted efforts aimed at mitigating workplace hazards and fostering a safer working environment for all. Moreover, the study's substantive insights and actionable recommendations offer invaluable guidance for policymakers, regulatory authorities, industry stakeholders, and relevant organizations, facilitating informed decision-making and fostering transformative changes to enhance occupational safety standards within Malaysia's construction sector.
References
Abas, N. H. (2021). The Perception of Work-Related Stress Indicators and the Relative Importance of Job Demand Stressors Among Construction Professionals in Malaysia. International Journal of Sustainable Construction Engineering and Technology, 12(4), 101–113. https://publisher.uthm.edu.my/ojs/index.php/IJSCET/article/view/9374
Abdul Halim, N. N. A., Jaafar, M. H., Mohamad Anuar Kamaruddin, M. A., Kamaruzaman, N. A., & Jamir Singh, P. S. (2020). The Causes Of Malaysian Construction Fatalities. Journal of Sustainability Science and Management, 15(5), 236–256. https://doi.org/10.46754/jssm.2020.07.018
Abioye, S. O., Oyedele, L. O., Akanbi, L., Ajayi, A., Davila Delgado, J. M., Bilal, M., Akinade, O. O., & Ahmed, A. (2021). Artificial Intelligence in the Construction industry: a Review of Present status, Opportunities and Future Challenges. Journal of Building Engineering, 44(1), 103299. Sciencedirect.
Aisheh, Y. I., Tayeh, B. A., Alaloul, W. S., & Almalki, A. (2021). Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics, 1, 1–13. https://doi.org/10.1080/10803548.2021.1942648
Alkaissy, M., Arashpour, M., Ashuri, B., Bai, Y., & Hosseini, R. (2020). Safety management in construction: 20 years of risk modeling. Safety Science, 129(1), 104805. https://doi.org/10.1016/j.ssci.2020.104805
Anibire, M. O., Mahmoud, A. S., Hassanain, M. A., & Salami, B. A. (2020). A risk assessment approach for enhancing construction safety performance. Safety Science, 121, 15–29. https://doi.org/10.1016/j.ssci.2019.08.044
Boadu, E. F., Wang, C. C., & Sunindijo, R. Y. (2020). Characteristics of the Construction Industry in Developing Countries and Its Implications for Health and Safety: An Exploratory Study in Ghana. International Journal of Environmental Research and Public Health, 17(11), 4110. https://doi.org/10.3390/ijerph17114110
Buniya, M. K., Othman, I., Durdyev, S., Sunindijo, R. Y., Ismail, S., & Kineber, A. F. (2021). Safety Program Elements in the Construction Industry: The Case of Iraq. International Journal of Environmental Research and Public Health, 18(2), 411. https://doi.org/10.3390/ijerph18020411
Hamid, A. R. A., Azmi, M. R. A., Aminudin, E., Jaya, R. P., Zakaria, R., Zawawi, A. M. M., Yahya, K., Haron, Z., Yunus, R., & Saar, C. C. (2021). Causes of fatal construction accidents in Malaysia. IOP Conference Series: Earth and Environmental Science, 220(1), 012044. https://doi.org/10.1088/1755-1315/220/1/012044
Ismail, S., Che Ibrahim, C. K. I., Belayutham, S., & Mohammad, M. Z. (2021). Analysis of attributes critical to the designer’s prevention through design competence in construction: the case of Malaysia. Architectural Engineering and Design Management, 1(2), 1–19. https://doi.org/10.1080/17452007.2021.1910926
Khalid, U., Sagoo, A., & Benachir, M. (2021). Safety Management System (SMS) framework development – Mitigating the critical safety factors affecting Health and Safety performance in construction projects. Safety Science, 143(0925-7535), 105402. https://doi.org/10.1016/j.ssci.2021.105402
Kineber, A. F., Antwi-Afari, M. F., Elghaish, F., Zamil, A. M. A., Alhusban, M., & Qaralleh, T. J. O. (2023). Benefits of Implementing Occupational Health and Safety Management Systems for the Sustainable Construction Industry: A Systematic Literature Review. Sustainability, 15(17), 12697. https://doi.org/10.3390/su151712697
Mohd, N. I., Ariffin, H. L., Hamid, M. H., Kidam, K., Ismail, M., Binti Ali, K. N., Mustaffa, N. E., Rohani, J. M., Sabrini, N. N., Abdullah, S., Mat Ali, N. B., & Fetri, M. S. (2020). Occupational safety and health construction industry management (OSHCIM): current practice in Malaysia. IOP Conference Series: Materials Science and Engineering, 849(1), 012012. https://doi.org/10.1088/1757-899x/849/1/012012
Musarat, M. A., Alaloul, W. S., Irfan, M., Sreenivasan, P., & Rabbani, M. B. A. (2022). Health and Safety Improvement through Industrial Revolution 4.0: Malaysian Construction Industry Case. Sustainability, 15(1), 201. https://doi.org/10.3390/su15010201
Nnaji, C., & Karakhan, A. A. (2020). Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers. Journal of Building Engineering, 29(1), 101212. sciencedirect. https://doi.org/10.1016/j.jobe.2020.101212
Nykänen, M., Puro, V., Tiikkaja, M., Kannisto, H., Lantto, E., Simpura, F., Uusitalo, J., Lukander, K., Räsänen, T., Heikkilä, T., & Teperi, A.-M. (2020). Implementing and evaluating novel safety training methods for construction sector workers: Results of a randomized controlled trial. Journal of Safety Research, 75(1), 205–221. https://doi.org/10.1016/j.jsr.2020.09.015
Sadeghi, H., Mohandes, S. R., Hosseini, M. R., Banihashemi, S., Mahdiyar, A., & Abdullah, A. (2020). Developing an Ensemble Predictive Safety Risk Assessment Model: Case of Malaysian Construction Projects. International Journal of Environmental Research and Public Health, 17(22), 8395. https://doi.org/10.3390/ijerph17228395
Samanta, S., & Gochhayat, J. (2021). Critique on occupational safety and health in construction sector: An Indian perspective. Materials Today: Proceedings, 1. https://doi.org/10.1016/j.matpr.2021.05.707
Shi, H., & Nadeem, M. A. (2022). Effects of Safety Leadership and Safety Management Practices on Safety Participation through Casual-chain Mediators Approach in the Chinese Construction Industry. International Journal of Occupational Safety and Ergonomics, 1(2), 1–27. https://doi.org/10.1080/10803548.2022.2131274
Simukonda, W., Manu, P., Mahamadu, A.-M., & Dziekonski, K. (2018). Occupational safety and health management in developing countries: a study of construction companies in Malawi. International Journal of Occupational Safety and Ergonomics, 1–16. https://doi.org/10.1080/10803548.2018.1482649
Wong, T. K. M., Man, S. S., & Chan, A. H. S. (2020). Critical factors for the use or non-use of personal protective equipment amongst construction workers. Safety Science, 126(1), 104663. https://doi.org/10.1016/j.ssci.2020.104663
Yap, J. B. H., Goay, P. L., Woon, Y. B., & Skitmore, M. (2021). Revisiting critical delay factors for construction: Analysing projects in Malaysia. Alexandria Engineering Journal, 60(1), 1717–1729. https://doi.org/10.1016/j.aej.2020.11.021
Zhou, Z., Goh, Y. M., & Li, Q. (2021). Overview and analysis of safety management studies in the construction industry. Safety Science, 72(1), 337–350. https://doi.org/10.1016/j.ssci.2014.10.006
Zulkeflee, A. (2020). Case Studies on The Current Safety Issue And Work Behaviour of Construction Site Workers In Malaysia. International Journal of Accounting, Finance and Business, 5(29), 18–28. https://researchportal.hw.ac.uk/en/publications/case-studies-on-the-current-safety-issue-and-work-behaviour-of-co
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 International Journal of Built Environment and Sustainability
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright of articles that appear in International Journal of Built Environment and Sustainability belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.
Authors who publish with this journal agree to the following terms:
- This Journal applies Creative Commons Licenses of CC-BY-NC-SA
- Authors retain copyright and grant the journal right of publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
